Product Overview
ANR RealBond Ready Mix Plaster is a pre-blended cement-based plaster formulated with high-grade sand and performance-enhancing additives. It delivers a smooth, durable finish on brick, block, and concrete surfaces — both interior and exterior.
Technical Specifications
| Property | Specification |
|---|---|
| Appearance | Grey, free-flowing powder |
| Water Demand | 16–18% by weight |
| Compressive Strength | ≥ 6 N/mm² (after 28 days) |
| Pot Life | 1.5–2 hours |
| Coverage (10–12mm) | 15–18 sq.ft per 40 kg bag |
| Application Thickness | 10–15 mm in a single coat |
| Bond Strength | ≥ 0.8 N/mm² |
| Shelf Life | 6 months (dry storage) |
The Best option
Key features
Factory-controlled quality for consistent mix
Reduces material wastage and manpower
Weather-resistant and shrinkage-free
Eliminates onsite mixing hassles
Excellent workability and adhesion
Advantages over Traditional Plaster
Advantages over Traditional Plaster
No sand screening or mixing required
Faster application & drying time
Uniform surface finish
Reduced water usage
Higher durability and less rework
Usage Instructions
Surface should be clean and moist before plastering.
Mix with clean water (16–18%) until paste-like.
Apply with trowel; finish with sponge or steel float.
Use within pot life for optimal performance.
Coverage
15–18 sq.ft per 40 kg bag for 10–12 mm thickness
Storage & Safety Tips
Store in a dry, shaded area
Avoid contact with eyes/skin
Wear gloves and dust masks during use
